Xerox Document Centre 50, User Manual

Page: 91 / 284

DOCUMENT CENTRE CS 50 USER GUIDE 4–19 BASIC COPYING
1
2
3
5
6
7
4
Paper Supply
The Paper Supply option enables you to select
output paper size and type.
The Basic Copying tab displays the Auto Paper
selection option. This option enables the copier/
printer to automatically detect the original
document size and select appropriate standard-
size paper in Paper Trays 1, 2, 3 or 4.
The Basic Copying tab also displays the contents
of three other trays, enabling you to specify your
selection for output size, as in Figure 23. The
Paper Supply More... button enables you to
access the Paper Supply screen.
The paper size displayed for Paper Trays 1, 2, 3,
and 4 is set when you adjust the paper guides as
part of the process of loading paper. The System
Administrator sets paper type for the trays in the
Tools mode.
You may select both the paper size and paper
type on the detail screen when loading paper into
Paper Tray 5.
NOTE: If you want to change the weight of paper
loaded in Paper Tray 2, 3, or 4 to be above 28 lb.
stock, contact your System Administrator or use
the Tools Mode to change the paper weight for the
specified tray before loading paper.
NOTE: Contact a Xerox Service Representative
to change the default size of Paper Tray 1.
Figure 23: Paper Supply on the
Basic Copying Tab