Xerox Document Centre 480, Color Management Manual

Page: 24 / 102

CMS Option Tool Xerox 490/980 Color Continuous Feed Printing System
2-12 Color Management Guide
Registering Custom Paper
To register custom paper:
1. Enter the Paper Setting. Set Paper Length to 18 inches.
2. Select a colorimetric pattern for color conversion. For color conversion, use Eye-One iSis.
3. The colorimetric pattern will be printed for color conversion. Select [ Print ] and then select
[ OK ].
4. Select [ OK ] in the CMS Option Tool window.
5. Cut out the pattern along the dotted line. Halftone Dot, Error Diffusion, and Upstream/
Downstream. Lead edge black bar and left edge are critical.
6. Measure the patterns using the Eye-One iSis.
a. Connect to the Eye-One iSis and switch on the power.
b. Select [ Start/Programs/X-Rite/ColorPort/ColorPort1.5.3/ColorPort 1.5.3 ].
c. Select [ Measure Target ] tab.
d. Select [ EyeOneiSis.rnd ] under Target.
e. Select [ X-Rite Eye-One iSis ] under Measurement Device.
f. Select [ Connect ].
g. Select [ No Filter ].
h. Insert the Halftone Dot pattern, and select [ Close ].
i. Select [ OK ] when measurement is successful.
j. Select [ Save Data... ].
k. Select [ CGATS ] then select [ Save ].
l. Save the file as eyeoneisis_up_ht.txt in the My Documents directory.
m. Select [ Clear Data... ].
n. Repeat the previous steps for Error Diffusion pattern.
o. Save file as eyeoneisis_up_ed.txt .
7. In the CMS Option Tool window, select the [ Custom Paper ] tab.
8. Enter the Media name in the “Enter or select the paper name” field.
9. Browse to the data files that you have created, under “Specify a measured value data file.”
There is a data file for Upstream and a data file for Downstream.
10. Select [ T01 ] in the “Select the CMYK ink characteristic” drop down menu. T01 is General
printing and T02 is for Newspapers.
11. Select [ Download the paper information to the printer ].
12. Select [ OK ] in the CMS Option Tool window.