Color Calibration Process for v1.1.6 Software
Xerox 490/980 Color Continuous Feed Printing System
5-28
Color Management Guide
Post-Calibration Density Check
The purpose of the following procedure is to confirm that the proper color density levels have
been achieved for optimum color calibration.
Note
This procedure must be performed:
•
For a Simplex System: One time.
•
For a Duplex System: One time for each printer.
1.
Open the [
Color Calibration Resources
] folder that was copied to the Windows Desktop.
2.
Select either the duplex or simplex test patterns. The test patterns are named as follows:
a.
For Simplex: [
Simplex Xerox 490980 Color Test Pattern.pdf
].
b.
For Duplex: [
Duplex Xerox 490980 Color Test Pattern.pdf
].
Test Pattern
Summary of Contents for Document Centre 480
Page 1: ...Xerox 490 980TM Color Continuous Feed Printing System Color Management Guide 27 October 2008 ...
Page 2: ......
Page 101: ......