CMS Option Tool
Xerox 490/980 Color Continuous Feed Printing System
2-8
Color Management Guide
Create Calibration Data
Use the Create Calibration Data tab to create a table to be used for calibration. This table is
generated based on measured colorimetric data. Select [
Resource Set at Destination
] to send
color resources to the printer.
How to Create Calibration Data
1.
Select the CMS Option Tool icon from the PC-GUI.
2.
Select the [
Create Calibration Data
] tab.
3.
Select the Paper Name from the pull-down menu.
4.
Select the desired data file for the printer(s). When selecting the data file for Halftone Dot,
the file will be *.ht. When selecting the data file for Error Diffusion, the file will be *.ed.
Select the first file for each.
5.
Select the Resource and set at destination or leave as System Default.
6.
Select [
Execute
].
For a detailed description of options on these selections, refer to the information in the
following section.
Select the paper type
All standard and registered types of paper will be listed. Select a paper type from this option.
Plain paper and Special paper are considered standard. All other paper types must be registered
through the Custom Paper option.
Summary of Contents for Document Centre 480
Page 1: ...Xerox 490 980TM Color Continuous Feed Printing System Color Management Guide 27 October 2008 ...
Page 2: ......
Page 101: ......
