Xerox 490/980 Color Continuous Feed Printing System
CMS Option Tool
Color Management Guide
2-9
Specify data file
Use this option to select a data file to be applied to the desired printer. If you are using a duplex
configuration, the first printer is referred to as [
Upstream
], the second printer is referred to as
[
Downstream
].
Use the following information to select the correct data file.
Upstream printer
•
For Halftone Dot: Select [
Browse
] to specify the halftone dot data for the printer. The file
will be named *.ht
•
For Error Diffusion: Select [
Browse
] to specify the error diffusion data for the printer. The
file will be named *.ed
Downstream Printer
•
For Halftone Dot: Select [
Browse
] to specify the halftone dot data for the printer. The file
will be named *.ht
•
For Error Diffusion: Select [
Browse
] to specify the error diffusion data for the printer. The
file will be named *.ed
Resource set at destination
Select the desired resource to be used as a color resource when downloaded for printing.
Execute
Select this option to generate calibration data.
Summary of Contents for Document Centre 480
Page 1: ...Xerox 490 980TM Color Continuous Feed Printing System Color Management Guide 27 October 2008 ...
Page 2: ......
Page 101: ......