![background image](http://html2.mh-extra.com/html/xerox/documate-6710/documate-6710_user-manual_3445879015.webp)
Xerox
®
DocuMate
®
6710
Welcome
2-4
User Guide
7.
Control panel
—Scanner hardware controls.
–
Power switch
—Turns the scanner’s power on or off.
–
Status light
— The status light indicates the current state of the scanner.
–
LCD screen
—Shows the current scan settings.
–
Function buttons
—Selects the scan setting for the One Touch buttons. Press left/right to
select groups and up/down to select jobs.
When Group 9 is selected, scrolling to Group 10 will display Scanner Information such as
firmware and software versions.
While viewing the Scanner Information, pressing the right cursor button again will allow
you to launch the User Utility by pressing
OK
.
–
Skip button
—After a double feed or folded corner is detected and scanning has been
paused, pressing this button will cause the document to be scanned and released before
the job continues.
–
Error light
—After an error is detected, the light will be activated.
–
Start/Stop button
—Press to start scanning. Pressing the button while scanning is in
progress stops the scan. Pressing the button while a double feed or folded corner has
been detected and paused will cause the document to be ejected without being scanned
and cancel the job.
1.
Pre-Imprinter Door
—Open to access the pre-imprinter compartment.
2.
Universal Serial Bus (USB) 3.0 port
—Connects the scanner to the computer.
3.
Power jack
—Connects the power cord to the scanner.
Groups 1 - 9
Scanner Information
Firmware
Serial Number
Driver Version
Acuity Version
OneTouch Version
Launch User Utility
Press
OK
Summary of Contents for DocuMate 6710
