Xerox DocuColor 5252 Administration Manual Download Page 26

Page: 26 / 108

DocuColor 5252 System Administration Guide

2-26

Tools Mode

Screen Saver

The Screen Saver feature allows you to protect the screen from
being damaged with permanent marks if the digital press with
scanner is idle for a period of time.

Touch the

Screen Saver

button on the

System Timers

screen.

The

Screen Saver

screen appears.

Use the up or down arrow buttons to change the time. The range
available is 10 to 60 minutes.
To use the system default time of 10 minutes, touch the

System

Default

button.

Touch the

Enter

button on the screen to enter the new time into

the system.

Touch the

Close

button to return to the

Machine Defaults 1

screen, or select another timer to change.

Summary of Contents for DocuColor 5252













































































































Search results

Summary of Contents for DocuColor 5252

Reviews:

Related manuals for DocuColor 5252

Brands by name

Popular brands

Xerox DocuColor 5252, Administration Manual

Search results

Summary of Contents for DocuColor 5252

Reviews:

Related manuals for DocuColor 5252

Brands by name

Popular brands