DocuColor 5252 System Administration Guide
2-21
Tools Mode
2 T
o
o
ls M
ode
Manual Adjust
The Manual Adjust feature enables you to modify each color
(CMYK) for Low, Mid, and High densities. You can also modify the
same settings for the highlight values of each screen.
Key point:
Manual Adjust should be used only by an expert in
color science. Any changes made on this screen remain in effect
for all future scanned jobs, until it is changed again.
1
Touch the
Manual Adjust
button on the
Auto Color Calibration
screen. The
Manual Adjust
screen appears.
The value displayed for each setting, 128, is the mid point
between 0 and 255. Entering a lower number produces a lighter
color. Entering a higher number produces a darker color. If you
make any changes, run test prints to evaluate the output prints.
