Xerox DocuColor 2060, Supplementary Manual

Page: 87 / 216

Printing using Xerox utilities and lpr utilities (DOS and UNIX)
Guide to Submitting Jobs from the Client 3-37
Color mismatch
NOTE: The information in this section applies to models 4850/
4890/92C only.
The following table shows the status at the printer controller and
the results of the printout when using the
lpr and the print
commands.
Table 3-1. Color match/mismatch results
HighlightColor
attribute
MapColor attribute
Mismatch Action
attribute
Result
Same as color
loaded in printer Matches HighlightColor
attribute Abort, Operator, Ignore/
UseLoadedColor Document prints in loaded
color.
Same as color
loaded in printer Does no match
HighlightColor attribute Abort, Operator, Ignore/
UseLoadedColor Document prints MapColor
portions of document in
loaded color.
Not the same as
color loaded in
printer Matches HighlightColor
attribute Ignore/
UseLoadedColor Document prints in loaded
color.
Not the same as
color loaded in
printer Does not match
HighlightColor attribute Ignore/
UseLoadedColor Document prints MapColor
portions of document in
loaded color.
Not the same as
color loaded in
printer Does not matter Abort Job is cancelled.
Not the same as
color loaded in
printer Matches HighlightColor
attribute Operator Job is Ineligible until Operator
changes color loaded in
printer to the HighlightColor
requested. Document then
prints in new loaded color.
Not the same as
color loaded in
printer Does not match
HighlightColor attribute Operator Job is Ineligible until Operator
changes color loaded in
printer to the Highlightcolor
requested. Document then
prints MapColor portion of
document in new loaded
color.