Printing using Xerox utilities and lpr utilities (DOS and UNIX)
Guide to Submitting Jobs from the Client
3-33
•
+(interval)
Specifies that the system periodically display the contents of
the print queue until it is empty. If you supply a value in
seconds for the interval, the workstation waits the specified
time before displaying the queue contents.
Example
The example below shows the command to display at ten-
second intervals the contents of the print queue submitted by
Susan to the printer “rushmore.”
lprm command
Use the
lprm
command to remove jobs from the print queue of a
specific virtual printer.
CAUTION
Caution: If you do not specify any options, the lprm command
removes all active jobs with your user name.
NOTE: This command is available only if you are using FTP
software and with standard UNIX lpr on a Sun workstation. See
the
lprm
command man page for more information.
To remove a print job from a queue, enter the
lprm
command
and its options on the command line using the following syntax:
Syntax
lprm
<options>
Options in DOS
Options are case sensitive. You can enter more than one option
at a time.
•
-\?
Displays the usage statement for
lprm
.
•
-S <printer controller>
Specifies that the request to delete be sent to the printer
controller you specify.
•
<job ID number>
Removes the job you specify as referred to in the job id
number specified by the
lpq
command and not the job id
number on the printer controller.
lpr -Pru10 susan
Summary of Contents for DocuColor 2060
Page 8: ...Table of contents viii Guide to Submitting Jobs from the Client...
Page 16: ...Safety xvi Guide to Submitting Jobs from the Client...
Page 50: ...Setting up workstations 2 22 Guide to Submitting Jobs from the Client...
Page 206: ...Printing using the Internet Printing Protocol 7 2 Guide to Submitting Jobs from the Client...
