Xerox DOCUCOLOR 12 System Administration Manual Download Page 99

Page: 99 / 110

DOCUCOLOR 12 SYSTEM ADMINISTRATION GUIDE

4–23

MAINTENANCE

Rotate the Paper Path Module Handle anti-
clockwise, to the up position, until it is in a locked
position.

Close the Front Door of the copier/printer.

Remove the sheets of paper on the floor under the
Paper Path Module and dispose of the sheets
according to local regulations.

CAUTION:Fuser oil can be slippery. If any fuser
oil has been spilled on the floor, thoroughly clean
the area.

WARNING: Do not place the fuser oil cartridge on
the copier/printer. If any fuser oil is spilled on the
copier/printer, thoroughly clean it.

WARNING: Fuser oil may cause irritation to your
eyes. Thoroughly wash your hands with soap and
water after handling the fuser oil cartridge.

Summary of Contents for DOCUCOLOR 12















































































































Search results

Summary of Contents for DOCUCOLOR 12

Reviews:

Related manuals for DOCUCOLOR 12

Brands by name

Popular brands

Xerox DOCUCOLOR 12, System Administration Manual

Search results

Summary of Contents for DOCUCOLOR 12

Reviews:

Related manuals for DOCUCOLOR 12

Brands by name

Popular brands