Xerox D110 User Manual Download Page 194

Page: 194 / 310

Note

Remedies differ according to the paper jam location. Follow the instructions displayed
to remove the jammed paper.

Paper jams in Tray 8/T1 (Post-Process Inserter)

1. Press the Cover button.

2. Open cover 1e and then remove the jammed paper and all paper loaded in the tray.

Note

If paper is torn, check inside the machine and remove it.

3. Fan the paper you removed, making sure that all four corners are neatly aligned, and

then load them again.

4. Push cover 1e until you hear it click into place.

Note

A message is displayed and the machine does not operate if the cover is open even
slightly.

User Guide

16-14

Standard/Booklet Maker Finisher

Summary of Contents for D110























































































































































































































































































































Search results

Summary of Contents for D110

Reviews:

Xerox D110, User Manual, Page: 194 / 310

Search results

Summary of Contents for D110

Reviews: