manualshive.com logo in svg

Xerox D110, User Manual, Page: 152 / 310

Share
Download
Xerox D110 User Manual Download Page 152

• Check the connection between the Interface Module/Interface Cooling Module and

the connected finishing device or devices.

• Fully clear any jams between the Interface Module/Interface Cooling Module and

the connection finishing device or devices.

• Ensure all jam clearance handles/levers are returned to their closed positions.

• After clearing all jams, remove any ejected paper from the finishing output area.

• Power Off/On the machine.

048-322

Cause:  Interface Module/Interface Cooling Module communication failure or
connection failure

Remedy:  Perform the following:

• Check the connection between the Interface Module/Interface Cooling Module and

the connected finishing device or devices.

• Fully clear any jams between the Interface Module/Interface Cooling Module and

the connection finishing device or devices.

• Ensure all jam clearance handles/levers are returned to their closed positions.

• After clearing all jams, remove any ejected paper from the finishing output area.

• Power Off/On the machine.

048-324

Cause:  Interface Module/Interface Cooling Module communication failure or
connection failure

Remedy:  Perform the following:

• Check the connection between the Interface Module/Interface Cooling Module and

the connected finishing device or devices.

• Fully clear any jams between the Interface Module/Interface Cooling Module and

the connection finishing device or devices.

• Ensure all jam clearance handles/levers are returned to their closed positions.

• After clearing all jams, remove any ejected paper from the finishing output area.

• Power Off/On the machine.

048-325

Cause:  Interface Module/Interface Cooling Module communication failure or
connection failure

Remedy:  Perform the following:

• Check the connection between the Interface Module/Interface Cooling Module and

the connected finishing device or devices.

• Fully clear any jams between the Interface Module/Interface Cooling Module and

the connection finishing device or devices.

• Ensure all jam clearance handles/levers are returned to their closed positions.

• After clearing all jams, remove any ejected paper from the finishing output area.

User Guide

14-12

Interface Module/Interface Cooling Module

Summary of Contents for D110























































































































































































































































































































Reviews:

No comments