manualshive.com logo in svg

Xerox D110, User Manual, Page: 137 / 310

Share
Download
Xerox D110 User Manual Download Page 137

Note

Trays other than the OHCF trays may be used in the interim.

078-274

Cause:  An OHCF tray has malfunctioned.

Remedy:  Perform the following:

1.

Check the paper loaded in the trays.

2.

Power Off/On the machine.

3.

If problems persist, contact the Customer Support Center.

Note

Trays other than the OHCF trays may be used in the interim.

078-275

Cause:  An OHCF tray has malfunctioned.

Remedy:  Perform the following:

1.

Check the paper loaded in the trays.

2.

Power Off/On the machine.

3.

If problems persist, contact the Customer Support Center.

Note

Trays other than the OHCF trays may be used in the interim.

078-276

Cause:  An OHCF tray has malfunctioned.

Remedy:  Perform the following:

1.

Check the paper loaded in the trays.

2.

Power Off/On the machine.

3.

If problems persist, contact the Customer Support Center.

Note

Trays other than the OHCF trays may be used in the interim.

078-277

Cause:  An OHCF tray has malfunctioned.

Remedy:  Perform the following:

1.

Check the paper loaded in the trays.

2.

Power Off/On the machine.

3.

If problems persist, contact the Customer Support Center.

Note

Trays other than the OHCF trays may be used in the interim.

13-19

Xerox

®

 D110/D125/D136 Printer

User Guide

Oversized High Capacity Feeder (OHCF), 1 or 2 trays (Trays 6/7)

Summary of Contents for D110























































































































































































































































































































Reviews:

No comments