Xerox D110, User Manual, Page: 163 / 310

2. Lift the green handle and/or rotate the green knob and remove all paper in the
entrance area.
3. Lift the green handle and/or rotate the green knob and remove all paper in the
entrance area.
4. Close the green handle(s).
5. Close the HCS Front Cover.
6. If the UI indicates there is a jam in the print engine, follow the instructions on the
screen to remove any paper in the area indicated.
7. Follow the instructions displayed on the UI to resume printing.
Hints and tips for using the HCS
Refer to the following hints and tips when using the HCS:
1. Check the paper in the Stock Tray for curl.
a) If no curl is present and if the output is acceptable (meets customer satisfaction),
you are finished.
b) If no curl is present and if the output is NOT acceptable, call for service.
c) If curl IS present, continue to the next step.
2. Check the paper in the Stock Tray for curl.
3. Adjust the paper curl by using the decurler controls on the top of the Interface
Module/Interface Cooling Module.
4. If the output has not improved, adjust the paper curl again.
5. If the output still has not improved, call the Customer Support Center.
15-9 Xerox ® D110/D125/D136 Printer
User Guide
High Capacity Stacker (HCS)