manualshive.com logo in svg

Xerox D110, User Manual, Page: 110 / 310

Share
Download
Xerox D110 User Manual Download Page 110

2. Remove the jammed paper.

Note

If paper is torn, check inside the machine and remove it.

3. Gently push in the tray until it comes to a stop.

Paper jams inside the HCF unit

Tip

Always ensure that all paper jams, including any small ripped pieces of paper, are cleared
before proceeding with your copy/print jobs.

This section describes how to remedy paper jams that occur at the following locations:

• Paper jams in lower left cover
• Paper jams at lever 1a and knob 1c
• Paper jams at lever 1b and knob 1c
• Paper jams at lever 1d and knob 1c

Note

Jam clearance remedies differ according to the paper jam location, so follow the displayed
instructions.

User Guide

12-4

High Capacity Feeder (HCF/Trays 6 and 7), 8.5 x 11 in./A4

Summary of Contents for D110























































































































































































































































































































Reviews:

No comments