manualshive.com logo in svg

Xerox D110, User Manual, Page: 140 / 310

Share
Download
Xerox D110 User Manual Download Page 140

2.

Power Off/On the machine.

3.

If problems persist, contact the Customer Support Center.

Note

Trays other than the OHCF trays may be used in the interim.

078-943

Cause:  An OHCF tray has malfunctioned.

Remedy:  Perform the following:

1.

Check the paper loaded in the trays.

2.

Power Off/On the machine.

3.

If problems persist, contact the Customer Support Center.

Note

Trays other than the OHCF trays may be used in the interim.

OHCF specifications

Oversized High Capacity Feeder (OHCF/Trays A1-1 and A1-2)

Specification

Item

SEF: 8.5 x 11 in./A4, 8.5 x 13 in., 8.5 x 14 in., 10 x 14 in./B4, 11 x 17 in./A3,
12 x 18 in., 12.6 x17.7 in./SRA3, 13 x 18 in., 13 x 19 in., 12.6 x 19.2 in., B5
LEF: B5, 7.25 x 10.5 in. (executive), A4, 8.5 x 11 in., 8.0 x 10 in.
Custom sizes: 182-330 mm (7.2-13 in.) width and 182-488 mm (7.2-19.2
in.) length

Sheet size

18 lb. to 130 lb. cover/55-350 gsm

Paper weight

2000 sheets/drawer

Important

When using up to Xerox 24 lb./90 gsm paper.

Paper capacity

User Guide

13-22

Oversized High Capacity Feeder (OHCF), 1 or 2 trays (Trays 6/7)

Summary of Contents for D110























































































































































































































































































































Reviews:

No comments