Home
/
Xerox
/
D110
/
User Manual

Xerox D110, User Manual, Page: 150 / 310

Share

Page: 150 / 310

Xerox D110 User Manual Download Page 150

Remedy: Perform the following:

1.

Open the Interface Module/Interface Cooling Module front door.

2.

Carefully remove all sheets and paper scraps from the jam clearance areas.

3.

Close the front door. Verify the paper used is within the approved paper
specifications.

048-103

Cause: Paper jam:

• A jam occurred during feeding.

• A jam notification is displayed on the UI.

Remedy: Perform the following:

1.

Open the Interface Module/Interface Cooling Module front door.

2.

Carefully remove all sheets and paper scraps from the jam clearance areas.

3.

Close the front door. Verify the paper used is within the approved paper
specifications.

048-300

Cause: The Interface Module/Interface Cooling Module front door is open.

Remedy: Close the Interface Module/Interface Cooling Module front door.

048-310

Cause: Interface Module/Interface Cooling Module decurler sensor or belt problem

Remedy: Power off the machine (print engine), then power on. If problem continues,
contact the Customer Support Center.

048-311

Cause: Interface Module/Interface Cooling Module decurler sensor or belt problem

Remedy: Power off the machine (print engine), then power on. If problem continues,
contact the Customer Support Center.

048-312

Cause: Interface Module/Interface Cooling Module decurler sensor or belt problem

Remedy: Power off the machine (print engine), then power on. If problem continues,
contact the Customer Support Center.

048-313

Cause: Interface Module/Interface Cooling Module decurler sensor or belt problem

Remedy: Power off the machine (print engine), then power on. If problem continues,
contact the Customer Support Center.

048-314

Cause: Interface Module/Interface Cooling Module decurler sensor or belt problem

User Guide

14-10

Interface Module/Interface Cooling Module

«
...
148
149
150
151
152
...
»

Summary of Contents for D110























































































































































































































































































































Reviews:

No comments