Xerox D1015 User Manual Download Page 7 | Manualshive

Page: 7 / 74

background image

7

Xerox Duplicator

Electrical Safety Information
1.

The power receptacle for the machine must meet the requirements stat-

ed on the data plate on the rear of the machine. If you are not sure that
your electrical supply meets the requirements, please consult your local
power company or an electrician for advice.

2.

The socket outlet shall be installed near the equipment and shall be eas-

ily accessible.

3.

Use the power cable that is supplied with your machine. Do not use an

extension cord or remove or modify the power cord plug.

4.

Plug the power cable directly into a correctly grounded electrical outlet.

If you are not sure whether or not an outlet is correctly grounded, consult
an electrician.

5.

Do not use an adapter to connect any Xerox equipment to an electrical

outlet that lacks a ground connection terminal.

6.

Do not place this equipment where people might step or trip on the

power cable.

7.

Do not place objects on the power cable.

8.

Do not push objects into slots or openings on the machine. Electrical

shock or fire may result.

9.

Do not obstruct ventilation openings. These openings are used to pro-

vide proper cooling to the Xerox machine.

Electrical Supply
1.

This product shall be operated from the type of electrical supply indict-

ed on the product’s data plate label. If you are not sure that your electrical
supply meets the requirements, please consult a licensed electrician for ad-
vice.

WARNING:

This equipment must be connected to

a protective earth circuit. This equipment is supplied
with a plug that has a protective earth pin. This plug
will only fit into an earthed electrical outlet. This is a

safety feature. If you are unable to insert the plug into the out-
let, contact a licensed electrician to replace the outlet.

2.

Always connect equipment to a correctly grounded power outlet. If in

doubt, have the outlet checked by a qualified electrician.

«
...
5
6
7
8
9
...
»

Summary of Contents for D1015











































































Reviews:

No comments

Related manuals for D1015

Brand: Datatronics Pages: 13

P-55 AutoPrinter

Brand: Teac Pages: 71

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands