33
Xerox Duplicator
Note: It is normal to see the progress indicator staying at 0-
10% and 100% for approximately 30 seconds for CD duplica-
tion and up to 1 minute for DVD duplication. That is caused by
the initializing and finalizing stages.
Once the duplication run is completed, the good copies will be ejected and
you should see the following screen.
Remove the good copies and refill the trays with additional blank media to
continue making more copies. You can also press << to terminate your
project and go back to the Main menu.
If you’ve specified a counter value for your project and your project is com-
pleted, you should see the following screen.
Copying
H4012MB
0
12%
481MB
or
Copying
H4012MB
0/21
12%
481MB
■
4012MB indicates the capacity
of the master disc.
■
481MB indicates the current
MB from the master disc that
has been copied.
■
12% indicates the current
progress of the duplication.
■
0 indicates that you have made
zero copies thus far.
■
H indicates you are copying
from a hard drive image.
■
4012MB indicates the capacity
of the master disc.
■
481MB indicates the current
MB from the master disc that
has been copied.
■
12% indicates the current
progress of the duplication.
■
0/21 indicates you have a
project size of 21 copies and
you have made zero copies thus
far.
■
H indicates you are copying
from a hard drive image.
Pass
7
Fail
0(7)
Waiting for Blank
■
Pass 7 indicates you have just
made seven successful copies.
■
Fail 0 indicates you have no fail-
ures in this run.
■
7 indicates you have successful-
ly copied seven copies thus far.
