Xerox D1015 User Manual Download Page 56 | Manualshive

Page: 56 / 74

background image

Xerox Duplicator

56

Chapter 2: Setup Guide

Menu Overview

■

Copy

. This menu will guide you to make CD/DVD copies. Before you

enter this menu to copy, please make sure you have selected the cor-
rect master Reading Source. For more information, refer to “Making
Disc-to-Disc Copies” on page 16 or “Making Hard Drive-to-Disc Cop-
ies” on page 22.

■

Test

. This menu will guide you to make simulation of copying pro-

cess. During this simulation process, all write once recordable discs
such as (DVD-R, CD-R) will be reusable. The purpose of performing
such simulation is to ensure error free duplication.

Note: Due to the physical limitation of DVD+R/RW recordable
format, you can not perform this procedure if your recordable
discs are DVD+R/RW recordable format. If you do so, you will
encounter failure messages.

Note: If you are using CD-RW/DVD-RW discs as your blanks
media during the simulation, all of the content inside those
discs will be erased permanently.

■

Compare

. This menu will guide you to perform a bit-by-bit compari-

son between the master Reading Source and all the copied discs in-
side the writer tray. The purpose to perform this compare operation
is to ensure all of your copies have the exactly same information as
your master Reading Source.

■

Test + Copy

. This menu will guide you to perform the simulation of

copying process and if everything has passed during the simulation,
a real copying process will be performed. If there’s an error encoun-
tered during the simulation, an error message will be displayed and
the copying process will not be initiated.

■

Copy + Compare

. This menu will guide you to make copies for you

and after the copy process has been finished, it will perform an addi-
tional comparison process automatically to ensure data correctness.

■

Verify

. This menu will guide you to perform Disc Readalibility Check.

This operation will check the readiblity of your master discs and the
copied discs. The purpose to perform this verify operation is to en-
sure all of your copies are readable.

■

Select Burn Speed

. This menu will guide you to adjust the duplica-

tion speed on various duplication modes. For more information, refer
to “How to Select the Duplication Speed” on page 35.

«
...
54
55
56
57
58
...
»

Summary of Contents for D1015











































































Reviews:

No comments

Related manuals for D1015

Brand: U-Reach Pages: 48

Brand: Teac Pages: 66

Brand: Aleratec Pages: 38

1:7 DVD/CD Tower Publisher SL

Brand: Aleratec Pages: 24

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands