Xerox CopyCentre C75, System Administration Manual

Page: 158 / 286

Tip
The other jobs must not have the same copy/print requirements as the faulted job. If
other jobs have different copy/print requirements, then these other jobs can be promoted
and copied/printed.
Note
Stored documents such as secure prints and sample prints are excluded and cannot be
automatically promoted.
Default Print Paper Size
Select the default paper size that will be used when printing a report/list. Select between
A4, or 8.5 × 11 inch.
Paper Size Settings
Select the default paper sizes for standard size originals and for automatic paper
detection. Select from five possibilities: A/B series (8 × 13"), A/B series, A/B series
(8K/16K), A/B series (8×13”/8×14”), and Inch series.
Keyboard Input Restriction
Select whether to restrict the display of the virtual keyboard on the UI. To prevent illegible
characters from occurring when one character set is switched to another character set,
restrict the input to ASCII characters only. If you select On (Standard ASCII only), the
displayed keyboard shows ASCII characters only.
Operation of Up/Down Buttons
Select whether or not there is a continuous scrolling effect when the scroll buttons are
held down.
• Disable Fast Scrolling: Scrolling does not occur when the scroll buttons are held
down.
• Enable Fast Scrolling: Scrolling occurs when the scroll buttons are held down.
Data Encryption
Tip
This is an optional accessory and may be purchased at an additional cost to the customer.
For more information, contact the Customer Support Center.
If you want the recorded data on the hard disk encrypted, select On as the default
setting for this feature. By switching on the data encryption, all data written to the hard
disk is automatically encrypted. Encryption prevents unauthorized access to the stored
data. When encryption is on, an encryption key must be set.
Xerox
®
Color C75 Press 9-50
System Administration Guide
Common Service Settings