Xerox CopyCentre 232, Supplementary Manual

Page: 4 / 19

1 Introduction
2 Xerox CopyCentre, WorkCentre, WorkCentre Pro 232/238/245/255/265/275 Tab Supplement
Copied jobs
The Insert feature is used for producing copied sets with imaged or non-imaged tab
dividers.
This feature, located on the
Basic Copying, Job Assembly
tab enables you to insert tab
stock into your copied sets and
print onto the tabs.
The screen contains instructions
for loading the tab stock into the
paper trays and the controls for
selecting the position of your tab stock in your final sets.
The Job Build feature is used to:
– copy jobs that exceed 70 pages
– copy an original document that has tab dividers.
Using this supplement
The instructions in this booklet will help you print and copy tab dividers:
Specifications
Type of Job Go to section...
Copy onto tabs only Copying onto tabs – page 7
Copy onto tabs automatically collated into the
copied sets Copying onto tabs – page 7
Make a copy of a document that has printed
tab dividers Copying using Build Job – page 12
Print onto tabs only Printing onto tabs – page 14
Print onto tabs as automatically collated into
the printed sets Printing onto tabs – page 14
Parameter
Specification
Paper Trays
Tab stock can only be loaded into
the Bypass Tray, Tray 1 or Tray 2
Tab Stock Sizes
A4, 8.5 x11 inches (9 x 11 inches)
Number of tabs per set 40
Number of tab positions
up to 5
Weight of tab stock 200 g/m² or 53lb stock
5, 19,