Xerox COLORQUBE 8570 User Manual Download Page 145

Page: 145 / 200

Troubleshooting

ColorQube 8570/8870 Color Printer

User Guide

145

Printer is Powered On But There is No Power

CAUTION:

Plug the three-wire cord (with grounding prong) directly into a grounded AC outlet

only. Do not use a power strip. If necessary, contact a licensed electrician to install a properly
grounded outlet.

Cannot Print to the Printer with a Network Connection

Connectivity problems can prevent you from being able to print to the printer.

Probable Cause

Solution

The power cord is not correctly plugged into the
outlet.

Turn off the printer, unplug it, wait 30 seconds, then
plug the power cord securely into the outlet. Turn the
printer on.

Something is wrong with the outlet the printer is
connected to.

Plug another electrical appliance into the outlet and
see whether it operates properly. If it does not, try a
different outlet.

The printer is connected to an outlet with a voltage or
frequency that does not match the printer
specifications.

Use a power source with the specifications listed in

Electrical Specifications

on page 182.

Probable Cause

Solutions

The IP address the printer driver is using is not the
one currently assigned to the printer.

Note:

If your printer is assigned an IP address

dynamically, your printer’s IP address may change
periodically even after you have installed the printer
driver.

1. Determine the IP address your printer is currently

using. For details, see

Finding the Printer’s IP

Address

on page 40.

2. Verify that the printer port is configured to the

same IP address or DNS name the printer is
using.

3. If necessary, configure the port to use the correct

IP address or DNS name.

4. To prevent the IP address from changing in the

future, you can do any of the following that
apply:

•

Assign a static IP address to the printer. For
details, see

Manually Assigning the IPv4 Address

on page 33, or

Manually Assigning an IPv6

Address

on page 37, whichever applies.

•

Use a DNS server that allows you to specify a
name for the printer and then point the printer
driver to the name instead of the IP address.
Consult the system administrator for details.

Summary of Contents for COLORQUBE 8570









































































































































































































Search results

Summary of Contents for COLORQUBE 8570

Reviews:

Related manuals for COLORQUBE 8570

Brands by name

Popular brands

Xerox COLORQUBE 8570, User Manual

Search results

Summary of Contents for COLORQUBE 8570

Reviews:

Related manuals for COLORQUBE 8570

Brands by name

Popular brands