Xerox B235, User Manual

Page: 150 / 316

M MEEN NU U IITTEEM M D DEESSC CRRIIPPTTIIO ON N
D Diiaall M Mooddee
• Tone*
• Pulse
Specify the dial mode for incoming or outgoing faxes.
Note: An asterisk (*) next to a value indicates the factory default setting.
A Addvvaanncceedd IIm maaggiinngg
M MEEN NU U IITTEEM M D DEESSC CRRIIPPTTIIO ON N
C Coonnttrraasstt
• Best for Content*
• 0
• 1
• 2
• 3
• 4
• 5
Set the contrast of the output.
B Baacckkggrroouunndd RReem moovvaall
• Level
• -4 to 4 (0*)
Adjust the amount of background visible on a scanned image.
SSccaann EEddggee ttoo EEddggee
• On
• Off*
Allow edge-to-edge scanning of the original document.
Note: An asterisk (*) next to a value indicates the factory default setting.
A Addm miinn C Coonnttrroollss
M MEEN NU U IITTEEM M D DEESSC CRRIIPPTTIIO ON N
A Auuttoom maattiicc RReeddiiaall
0–9 (5*)
Adjust the number of redial attempts based on the activity levels of
recipient fax machines.
RReeddiiaall FFrreeqquueennccyy
1–200 minutes (3*)
Increase the time between redial attempts to increase the chance of
sending fax successfully.
EEnnaabbllee EEC CM M
• On*
• Off
Activate Error Correction Mode (ECM) for fax jobs.
Note: ECM detects and corrects errors in the fax transmission
process caused by telephone line noise and poor signal strength.
EEnnaabbllee FFaaxx SSccaannss
• On*
Fax documents that are scanned at the printer.
150
Xerox
®
B225/B235 Multifunction Printer User Guide
Use printer menus