Xerox B235, User Manual, Page: 141 / 316

M MEEN NU U IITTEEM M D DEESSC CRRIIPPTTIIO ON N
Note: A symbol set is a set of alphabetic and
numeric characters, punctuation, and special
symbols. Symbol sets support the different
languages or specific programs such as math
symbols for scientific text.
PPiittcchh
0.08–100 (10*)
Specify the pitch for fixed or monospaced fonts.
Note: Pitch refers to the number of fixed-space
characters in a horizontal inch of type.
O Orriieennttaattiioonn
• Portrait*
• Landscape
• Reverse Portrait
• Reverse Landscape
Specify the orientation of text and graphics on the
page.
LLiinneess ppeerr PPaaggee
1–255
Specify the number of lines of text for each page
printed through the PCL data stream.
• This menu item activates vertical escapement that
causesthe selected number of requested lines to
print between the default margins of the page.
• 60 is the U.S. factory default setting. 64 is the
international factory default setting.
PPC CLL5 5 M Miinniim muum m LLiinnee W Wiiddtthh
1–30 (2*)
Set the initial minimum stroke width of any job printed
in 1200 dpi.
PPC CLLXXLL M Miinniim muum m LLiinnee W Wiiddtthh
1–30 (2*)
A A4 4 W Wiiddtthh
• 198mm*
• 203mm
Set the width of the logical page on A4-size paper.
Note: Logical page is the space on the physical
page where data is printed.
A Auuttoo C CRR aafftteerr LLFF
• Off*
• On
Set the printer to perform a carriage return after a line
feed control command.
Note: Carriage return is a mechanism that
commands the printer to move the position of
the cursor to the first position on the same line.
A Auuttoo LLFF aafftteerr C CRR
• Off*
• On
Set the printer to perform a line feed after a carriage
return control command.
PPrriinntt TTiim meeoouutt
• Disabled
Enable the printer to end a print job after it has been
idle for the specified amount of time in seconds.
Xerox
®
B225/B235 Multifunction Printer User Guide
141
Use printer menus