Xerox B205, Service Manual

Page: 185 / 206

July 2019
6-26 Xerox® B205/B215 Multifunction Printer Service Manual
GP 10
Initial Release General Procedures / Information
GP 10 SA Password Reset
Purpose
The SA Password Reset process steps through resetting the SA Password back to the default
value (device serial number) via a Memory Clear. The Memory Clear function forces the value
in a particular location on the Main PWB to become the SA Password. The value that resides
in this location is the device serial number.
CAUTION
Performing a Memory Clear sets the SA Password back to the default value (device
serial number). Inform the customer to reset the SA Password back to the customer created
password.
Procedure
B215 [Clear All Memory]
1.
Switch on the machine.
2.
Enter Diagnostics, GP 1 , then perform the <Clear All Memory> operation: [Data Setup >
Machine Data > Clear All Memory] .
3.
Print a Configuration Report, refer to GP 2 , Machine Reports, then verify the original
machine serial number is displayed under the <Device Profile> heading
.
CAUTION
Each time a Memory Clear operation is performed the NVM is cleared and must be initiaized.
Perform
dC132 NVM INIT.
B205 [Clear All Memory]
1.
Switch on the machine.
2.
Enter Diagnostics, GP 1 , then perform the <Clear All Memory> operation: [Data Setup >
Machine Data > Clear All Memory] .
3.
Print a Configuration Report, refer to GP 2 , Machine Reports, then verify the original
machine serial number is displayed under the <Device Profile> heading
CAUTION
Each time a Memory Clear operation is performed the NVM is cleared and must be initiaized.
Perform
dC132 NVM INIT.
NOTE:
After performing a Memory Clear, inform the customer that they will need to re-estab -
lish their Wireless or Ethernet connection.
NOTE:
After performing a Memory Clear, inform the customer that they will need to re-estab -
lish their Wireless or Ethernet connection.