Xerox B205, Service Manual

Page: 106 / 206

July 2019
4-39 Xerox® B205/B215 Multifunction Printer Service Manual
REP 4.12
Repairs / Adjustments Initial Release
REP 4.12 Exit Sensor
Parts List on PL 4.5
Removal
1. Remove the following covers:
a. Remove the Left and Right Side Covers, REP 2.2 .
b. Remove the Rear Cover, REP 2.3 .
2. Remove the Fuser Module.
3. Press the latch on the underside of the frame to release the Exit Sensor Mounting Plate
from the frame,
Figure 1 .
Figure 1 Exit Sensor Plate Latch Release (Bottom View)
4. Remove the Exit Sensor, Figure 2 :
a. Release the wires from the cable clamps.
b. Unlatch the Exit Sensor, remove the Exit Sensor, then disconnect the connector.
Figure 2 Exit Sensor Removal (Rear View)
Replacement
The replacement is the reverse of the removal procedure.
Latch
Exit Sensor