Xerox 8254E, User Manual

Page: 13 / 244

1 Safety Instructions
8254E / 8264E User Guide 3
Do not spill flammable liquid over the platen. Doing so may result in fire.
Do not insert or drop metal or flammable objects into the printer through openings such as a fresh
air inlet. Doing so may result in an electric shock or fire.
If foreign substances or liquids such as water enter the printer, do not use the printer. Doing so may
result in an electric shock or fire.
Immediately press the printer’s [Power] key to turn it OFF, disconnect the power supply cable from
the building’s electrical outlet, and contact your local XEROX dealer.
Before cleaning this product, unplug the product from the electrical outlet. Always use materials
specifically designated for this product, the use of other materials may result in poor performance
and create a hazardous situation.
Do not use aerosol cleaners. Aerosol cleaners can be explosive or
flammable when used on electromechanical equipment
.
Always exercise care when moving or relocating equipment. Please contact your local Xerox Service
Department to arrange relocation of the copier to a location outside of your building.
Always locate the machine on a solid support surface (not on plush carpet) that has adequate strength
to support the weight of the machine.
Always locate the machine in an area that has adequate ventilation and room for servicing.
Always unplug this equipment from the electrical outlet before cleaning.
Never attempt any maintenance function that is not specifically described in this documentation.
Never locate the machine near a radiator or any other heat source.
Never override or “cheat” any of the electrical or mechanical interlock devices.
Never place this equipment where people might step on or trip on the power cord.
This equipment should not be placed in a room unless proper ventilation is provided. Please contact
your local Authorized dealer for further information.
The power receptacle for the machine must meet the requirements stated on the data plate on the rear
of the machine. If you are not sure that your electrical supply meets the requirements, please consult
your local power company or an electrician for advice.