![background image](http://html2.mh-extra.com/html/xerox/6100bd-phaser-color-laser-printer/6100bd-phaser-color-laser-printer_fundamentals_3327633101.webp)
Quality control
Generic MICR Fundamentals Guide
6-15
Xerographic ink spots can be larger than the ANSI specifications
because of the low ferromagnetic component of the dry ink. Also,
the xerographic soft spotting effect minimizes the signal pattern
defect.
The following table shows the Xerox MICR printing system
xerographic specification for extraneous ink or spots in the clear
band.
Examples of extraneous ink or spots are illustrated in the
following figure.
Any number of black spots
0.25 mm and smaller / 0.01 inch
Total 16 black spots per page 0.25 mm – 0.40 mm* / 0.01 inch – 0.016 inch
One black spot per page
0.40 mm – 0.50 mm / 0.016 inch – 0.02 inch
No black spots
0.50 mm or larger / <0.02 inch
*No more than one spot per 6 by 3 mm / 0.25 by 0.125 inch area is allowed if
the spot is greater than 0.01 inch/0.25 mm in size.
Summary of Contents for 6100BD - Phaser Color Laser Printer
