Xerox 5915, Service Manual

Page: 71 / 146

4-36
Section 4 Disassembly/Assembly/Adjustment
9. Electrical
CHAIN CODE 20 TABLE
∗
The list below deletes Function which do not need recording.
CHAIN
CODE
FUNCTION
CODE
SETUP ITEM MIN. VALUE INITIAL VALUE MAX.VALUE 1 STEP CHANGE ADJ
20 1 Registration Adjustment 16(-4.13mm) 32 64(+4.13mm) 0.2584mm
2.7.6
2 Light Quantity Adj. 100% 0 30 80 0.8%
5.1.4-A
Enlargement/Reduction 0 50 99 0.8%
5.1.4-A
3 Paper Loop Amount Adjustment 0(-8.27mm) 32 64(+8.27mm) 0.2584mm
4 ISIL Lead Edge Erase Amount Adjustment 0(-8.27mm) 32 64(+8.27mm) 0.2584mm
5.1.6
5 ISIL Trail Edge Erase Amount Adjustment 0(-8.27mm) 32 64(+8.27mm) 0.2584mm
5.1.6
6 Fine Tuning of 100% Horizontal Magnification 0(-2.272%) 32 64(+2.272%) 0.071%
4.3.4
7 Fine Tuning of 100% Vertical Magnification 0(-3.16%) 32 64(+3.16%) 0.099%
4.3.4
10 MSI Paper Loop Amount Adjustment 0(-8.27mm) 32 64(+8.27mm) 0.2584mm -
11 MSI Registration Adjustment 16(-4.13mm) 32 48(+4.13mm) 0.2584mm
14 Selection of Exposure Photoreceptor Sensitivity Correction 0(OFF) 1(ON) 1(ON) -
16 Bias Curve Selection 1 0 4 8 -
17 Bias Curve Selection 2 0(slot) 1(Flat) 1(Flat) -
20 Light Quantity Adj. 0 50 99
5.1.4-A
23 Drum Photoreceptor Sensitivity Correction Constant 0(0) 11(1.1) 40(4.0) 0.1 -
30 Fuser Temperature Adjustment (Stand-by)
0(-23
°
C)
32
39(+5
°
C) 0.72
°
C
-
31 Fuser Temp. Adjustment (Copy cycle) 0(-23
°
C) 32 39(+5
°
C) 0.72
°
C -
41 Density Correction Light 6 0(0V) 52(-413V) 64(-500V) -7.8125V -
42 Density Correction Dark 6 0(0V) 16(-125V) 64(-500V) -7.8125V -
45 Density Correction Photo Light 6 0(0V) 50(-388V) 64(-500V) -7.8125V -
46 Density Correction Photo Dark 6 0(0V) 24(-184V) 64(-500V) -7.8125V -
96 NVM Initialization This initializes all NVM values.
50 9 Black band Function Time 1 0(-5.168mm) 20(+9.56mm) 64(+5.168mm) 0.2584mm
10 Black band Function Time 2 0(-6.732mm) 64(+10.3mm) 64(+6.732mm) 0.2584mm