Xerox 5915, Service Manual

Page: 42 / 146

4-7 2. Paper Handling
Section 4 Disassembly/Assembly/Adjustment
Replacement Procedure
For Pick Up Gear only
6. (Fig. 5): Remove the Pick Up Gear.
➀
. Remove the Spring.
➁
. Keep pushing the hook of the pick up gear
using the small screw gear.
➂ . Remove the pick up gear.
(Fig. 5)
Replacement Procedure
for No Paper Sensor only
6. (Fig. 6): Remove the No Paper Sensor.
➀
. Remove No Paper Sensor tab.
➁
. Lift Actuator.
➂
. Remove No Paper Sensor.
➃ . Remove Connector.
(Fig.6)
Common Procedure
Installation
1. Perform the installation in the reverse order of
removal.
NOTE :
•
(Fig.7): Install the Feeder Assy to the
machine with the Feed Roller half-
moon shaped facing upwards.
(Fig. 7)
•
When installing the Feeder Assembly to
the machine, take great care not to
damage the No Paper Sensor Actuator.
•
(Fig. 8): Install the Feeder Assy to the
machine with the Assy cutouts hooked on
the machine pins.
(Fig. 8)
•
Reconfirm that the Feed Roller half-moon
shape faces upwards before installing the
appropriate Tray.
NOTE :
•
After the replacement of the No
Paper Sensor, check the Sensors
using the following Diag Codes.
Sensor Diag. Code
Tray 1 No Paper Sensor 7-6
➀
➁
➂
Face up
Cut outs Pin