Xerox 5915, Service Manual

Page: 116 / 146

6-6
Section 6 GENERAL
6.2 Tools and Consumables for servicing
6.2 Tools and Consumables for
servicing
6.2.1 Tools
No. TOOL No. TOOL NAME
1 499T225 TEST PATTERN(CAM-II)
2 499T7002 TEST PATTERN CASE
3 499T247 TEST PATTERN (A3):10
4 499T248 TEST PATTERN (B4):10
5 499T301 MINI DRIVER(-)
6 499T355 SCREW )
7 499T1423 BOX DRIVER 5.5
8 499T1901 SIDE CUTTING NIPPER
9 499T2004 ROUND NOSE PLIER
10 499T2320 C/E TESTER SET
11 499T6025 C/E TOOLS CASE
12 499T8104 FLASH LIGHT(UM-2)
13 499T8902 BRUSH
14 499T9583 TESTER LEAD WIRE(RED)
15 499T451 SPANNER AND WRENCH
5.5
×
5.5
16 499T2601 SILVER SCALE(150mm)
17 499T6402 MAGNETICS SCREW
PICK UP TOOL
18 606T50206 CHEAT
6.2.2 Consumables for servicing
•
There are no unique consumables for this
model.
In case any servicing arises requiring a
particular consumable unique to this model,
the case will be handled separately.
6.3 Consumables
The consumables available with this model are:
Name Prod. Code Capacity Ref. Life
Drum Unit 673S50211 50K
Toner Cartridge
(black)
6R01020 500g 6K
* 6% Area coverage is assumed on A4 size
documents.
6.4 Modification
6.4.1 Symbology
When there are differences by modification in
the Manual, the modification code will be
shown by symbols or marks as below.
1
1
6.4.2 Relevant Area
Modification is Implemented relative to the
following areas:
•
Reliability
•
Safety
•
Market Requirement
•
Maintainability
•
Operability
6.4.3 Modification List
Lists not issued: Technical Information will be
issued as necessary, using the formally
recognise procedures
The arrow points out the information
which modification (shown by the No.)
has been introduced.
The arrow points out the information
which modification (shown by the No.)
has not been introduced yet.