6. Remove the PCR from its holders.
7. Remove the two screws and wiper blade.
8. Clean out the waste chamber. Be very careful not to lose or
damage the foam wiper blade seal. This seal is very fragile and
a vacuum/compressed air cleaning system will damage it if
you are not careful.
9. Coat the wiper blade with your preferred lubricant, and
install in the cartridge. Install the two (gold)long screws, the
four short screws are for the drum axle pins only.
XEROX PHASER 5400 TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS
© 2010 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact [email protected]
www.
uninet
imaging.com
