12
getting started guide
E-mail Setup
If you wish to setup the E-mail service follow this procedure. If you do not want to setup this
service at this time continue on to
Fax Setup
.
If your WorkCentre is a network connected configuration, it will arrive with the E-mail service
enabled.
NOTE:
If you do not see the E-mail button on the All Services screen, enable E-mail in the
Tools Pathway. (Select
Access
>
Passcode [1111]
>
Enter
>
Go to Tools
>
More
>
Optional Services
>
.)
Before starting the setup procedure, please ensure the following items are available or have
been performed.
• Ensure the WorkCentre is fully functioning on the network and that the E-mail
service is available on the
All Services
screen.
• Ensure that the TCP/IP and HTTP protocols are configured on the device and fully
functional. Refer to
Network Setup Using a Static IP Address on page 10
.
• Obtain the IP Address of a functional SMTP mail server that accepts inbound mail
traffic.
• Ensure the DNS settings are configured correctly and obtain the Domain Name
address, if applicable.
• Create an E-mail account which the WorkCentre will use as the default
From
address.
• Test the E-mail account by sending an E-mail to the Xerox device account. This
task should be completed at a mail client on your network that supports SMTP
(Simple Mail Transfer Protocol) and POP3 (Post Office Protocol 3).
You will use Internet Services to configure E-mail settings and this is accessed through your
web browser.
1
Open your Web browser and enter the TCP/IP address of the WorkCentre in the Address
bar. Press
Enter
.
2
Select
Properties
>
Connectivity
>
Protocols
>
TCP/IP
.
3
Enter the domain name in the
Domain Name
box (for example: abc.xyz.company.com). It is
only necessary to configure the DNS settings if Host Names are to be used.
NOTE:
If Dynamic Addressing has been set on the WorkCentre (DHCP or BootP) the
Domain Name will not be accessible. If you need to change it, select
Static
from the IP
Address Resolution menu list.
4
Scroll to the bottom of the screen and click the
Apply
button to implement any changes.
Enter the current administrator tools
User Name
and
Password
. The default is
[admin]
which is case sensitive, and
[1111]
.
5
From the
Protocols
menu select
SMTP Server
.
6
Select either
IP Address
or
Host Name
and enter the
Host Name
or the
IP Address
and
Port Number
(1-65535) of the SMTP Server. The default Port is 25.
7
Check the box if your
Server Requires SMTP Authentication
.
8
Enter the
Login Name
and
Password
.
Summary of Contents for 4150 - WorkCentre B/W Laser
Page 1: ...WorkCentre 4150 Getting Started Guide...
Page 2: ......
Page 3: ...WorkCentre 4150 Getting Started Guide...
Page 4: ......
