![background image](http://html2.mh-extra.com/html/xerox/4150-workcentre-b-w-laser/4150-workcentre-b-w-laser_getting-started-manual_3398396014.webp)
10
getting started guide
2
Confirm that an IP address has been allocated and that it is an appropriate IP address for
your network.
NOTE:
If the IP address starts with 169.xxx.xxx.xxx, the DHCP server has not properly
allocated an address or DHCP is not enabled on your network. Contact your network
administrator for assistance.
Network Setup Using a Static IP Address
Before you begin, obtain the following information from your network administrator:
• IP Address
• Gateway Address
• Subnet Mask
• DNS Server Address
1
Press the
Access
button on the Control Panel, enter the
Administrator’s passcode
[1111]
and select
Enter
.
2
On the screen select
Go to Tools
>
Connectivity and
Network Setup
>
Network Setup
>
TCP/IP Options
.
3
Select
HTTP
and
Enable
. Select
Save
.
4
Select
TCP/IP Settings
.
5
Touch the
Dynamic Addressing
button. By default, DHCP
will be selected. Select
Disabled
to disable DHCP and
touch
Save
.
6
Select
Name/Address
. Enter the
Host Name
, by touching the Keyboard symbol. Enter the
IP Address
by touching each box and entering the number using the
Numeric Keypad
.
Select
Save
.
7
Select
Subnet and Gateway
. Enter the
Subnet Mask
and
IP Gateway.
Select
Save
.
8
If you do not wish to configure DNS settings proceed to the next step. If you wish to
configure DNS settings select the
DNS Configuration
button. Enter the
Domain Name
and
the
Preferred DNS Server
address. Select
Save
.
9
The static IP address is now set. Select
Exit Tools
.
Summary of Contents for 4150 - WorkCentre B/W Laser
Page 1: ...WorkCentre 4150 Getting Started Guide...
Page 2: ......
Page 3: ...WorkCentre 4150 Getting Started Guide...
Page 4: ......