Xerox 4050, Operator'S Manual

Page: 7 / 168

TABLE OF CONTENTS
Checking the HIP job queue status 4-8
Checking job status 4-10
Managing print jobs 4-11
Aborting a print job 4-11
Ending a print job 4-12
Interrupting a print job 4-12
What to do when the system stops printing 4-12
Resuming an interrupted print job 4-13
Stopping a HIP print job 4-13
5. Print job maintenance
5-1
Adding dry ink 5-1
Adding stitcher wire 5-3
Adjusting form alignment 5-3
Changing paper size 5-6
Loading feeder trays 5-6
Selecting feeder trays 5-10
Understanding clusters 5-10
Displaying cluster status 5-12
Setting current trays 5-13
Modifying current trays 5-14
Redefining the preferred trays 5-14
Assigning all system trays to a cluster 5-14
Changing the stock in a tray assigned to an active cluster 5-15
Error conditions 5-15
Using the FEED command 5-16
Selecting output trays 5-17
Changing the output tray specification while the job is
printing
5-18
Unloading output trays 5-19
Unloading dual stacker trays 5-19
Unloading the stitcher/stacker tray 5-20
Unloading the sample tray 5-20
6. Printer maintenance
6-1
Adding fuser lubricant 6-1
Cleaning the 9-track magnetic tape drive 6-4
Changing the 1/4-inch cartridge tape drive 6-9
Cleaning the diskette drive 6-10
Cleaning exterior surfaces 6-11
Copying and backing up files 6-11
Copying files 6-11
XEROX 4050/4090/4450/4650 LPS OPERATOR GUIDE vii