Xerox 3150 - Phaser B/W Laser Printer User Manual Download Page 56

Page: 56 / 152

SING

RINT

ATERIALS

3.17

Printing on Labels

Open the

Tray 1

and the rear output tray.

Load labels with the print side up.

Guidelines
• Only use labels recommended for laser printers.
• Verify that the labels’ adhesive material can tolerate fusing

temperature of 205°C (400°F) for 0.1 second.

• Make sure that there is no exposed adhesive material

between the labels. Exposed areas can cause labels to peel

off during printing, which can cause paper jams. Exposed

adhesive can also cause damage to printer components.

• Do not feed a sheet of labels through the printer more than

once. The adhesive backing is designed for one pass through

the printer.

• Do not use labels that are separating from the backing sheet

or are wrinkled, bubbled, or otherwise damaged.

Summary of Contents for 3150 - Phaser B/W Laser Printer

























































































































































Search results

Summary of Contents for 3150 - Phaser B/W Laser Printer

Reviews:

Related manuals for 3150 - Phaser B/W Laser Printer

Brands by name

Popular brands

Xerox 3150 - Phaser B/W Laser Printer, User Manual

Search results

Summary of Contents for 3150 - Phaser B/W Laser Printer

Reviews:

Related manuals for 3150 - Phaser B/W Laser Printer

Brands by name

Popular brands