Xerox 3150 - Phaser B/W Laser Printer User Manual Download Page 27

Page: 27 / 152

2.8

ETTING

OUR

RINTER

You can load previously printed paper. The printed side

should be facing up with an uncurled edge on top. If you

experience problems with paper feed, turn the paper

around.

Make sure that all four corners are flat in the tray.

OTE

If you want to change the paper size in the tray, see

“Changing the Paper Size in the Paper Tray” on page 2.9.

Pay attention to the paper limit mark on the left inside wall
of the tray. Paper overloading may cause paper jams.

Slide the tray back into the printer.

Summary of Contents for 3150 - Phaser B/W Laser Printer

























































































































































Search results

Summary of Contents for 3150 - Phaser B/W Laser Printer

Reviews:

Related manuals for 3150 - Phaser B/W Laser Printer

Brands by name

Popular brands

Xerox 3150 - Phaser B/W Laser Printer, User Manual

Search results

Summary of Contents for 3150 - Phaser B/W Laser Printer

Reviews:

Related manuals for 3150 - Phaser B/W Laser Printer

Brands by name

Popular brands