Xerox 3150 - Phaser B/W Laser Printer, User Manual

Page: 31 / 152

2.12
S
ETTING
U
P
Y
OUR
P
RINTER
Using a Parallel Cable
N
OTE
:
To connect the printer to the parallel port of the computer
requires a certified parallel cable. You will need to buy an
IEEE1284 compliant cable.
1
Make sure that both the printer and the computer are
turned off.
2
Plug the parallel printer cable into the connector on the
back of the printer.
Push the metal clips down to fit inside the notches on the
cable plug.
3
Connect the other end of the cable to the parallel interface
port on your computer, and tighten the screws.
See your computer User’s Guide if you need help.