Xerox 3150 - Phaser B/W Laser Printer, User Manual

Page: 114 / 152

S
OLVING PROBLEMS
6.19
6
Common Windows Problems
N
OTE
:
Refer to the Microsoft Windows 98/Me/NT 4.0/2000/XP User’s Guide that came
with your PC for further information on Windows error messages.
• You pressed the button while the printer
was receiving data.
• In Manual Feed mode, there is no paper in the
Tray 1. Load paper into the Tray 1.
• If the printer is receiving data, the LED
slowly blinks green.
• If the printer is printing the received data, the
LED blinks green fast.
• If the installed toner cartridge is empty, the
LED blinks orange. Replace the toner
cartridge. To replace the toner cartridge, see
“Installing the Toner Cartridge” on page 2.4.
• If you have installed a toner cartridge that is not
designed for the printer, the LED blinks
orange and red in turn. Install a correct toner
cartridge.
LED
pattern
Possible Problems and Solutions
Problem Possible Cause and Solution
“File in Use” message
appears during installation.
Exit all software applications. Remove all software from the
StartUp Group, then restart Windows. Reinstall the printer
driver.
“Error Writing to LPTx”
message appears.
• Ensure that the cables are connected correctly, and the
printer is on.
• If bi-directional communication is not turned on in the
driver, it will also cause this message.
“General Protection Fault”,
“Exception OE”, “Spool32”,
or “Illegal Operation”
messages appear.
Close all other applications, reboot Windows, and try
printing again.