Xerox 3150 - Phaser B/W Laser Printer User Manual Download Page 24

Page: 24 / 152

ETTING

OUR

RINTER

2.5

Gently shake the cartridge from side to side to distribute
the toner evenly inside the cartridge.

AUTIONS

• To prevent damage, do not expose the toner cartridge to light for

more than a few minutes. Cover it with a piece of paper if left

exposed for more than a few minutes and keep it in a flat and

clean place.

• If toner gets on your clothing, wipe it off with a dry cloth and

wash clothing in cold water. Hot water sets toner into fabric.

Locate the cartridge slots inside the printer, one on each
side.

Summary of Contents for 3150 - Phaser B/W Laser Printer

























































































































































Search results

Summary of Contents for 3150 - Phaser B/W Laser Printer

Reviews:

Related manuals for 3150 - Phaser B/W Laser Printer

Brands by name

Popular brands

Xerox 3150 - Phaser B/W Laser Printer, User Manual

Search results

Summary of Contents for 3150 - Phaser B/W Laser Printer

Reviews:

Related manuals for 3150 - Phaser B/W Laser Printer

Brands by name

Popular brands