User Manual
Wildcat
Company confidential.
This document is the property of Xenics. It may not be reproduced
–
completely or partially
–
or passed to a third
party without written permission from Xenics.
Xenics nv
T +32 16 38 99 00
Doc Ref: ENG-2020-UMN001
Ambachtenlaan 44
F +32 16 38 99 01
Issue: R001
BE-3001 Leuven
Belgium
www.xenics.com
Date:
XF-104_03/20-12-2012
Page 32 of 58
External Trigger
The trigger engine can be enabled to activate on external triggers, provided through the
unified connector. To configure the camera in this mode, set
Acquisition control
– Trigger
control
– Mode
to
Triggered
.
The trigger
Activation
setting has following values:
•
Disabled
: no external signals can generate a trigger
•
Rising edge
: a trigger is generated at the rising edge of the signal
•
Falling edge
: a trigger is generated at the falling edge of the signal
•
High level
: multiple triggers will be generated so long as the signal is high
•
Low level
: multiple triggers will be generated so long as the signal is low
The
Source
setting defines which external trigger input channel is in control.
