Xenics Wildcat CL 100, User Manual

Page: 54 / 58

User Manual
Wildcat
Company confidential.
This document is the property of Xenics. It may not be reproduced – completely or partially – or passed to a third
party without written permission from Xenics.
Xenics nv T +32 16 38 99 00 Doc Ref: ENG-2020-UMN001
Ambachtenlaan 44 F +32 16 38 99 01 Issue: R001
BE-3001 Leuven

Belgium www.xenics.com Date:
XF-104_03/20-12-2012
Page 54 of 58
Pixel correction control
The base address for these registers is 0x5030_2000
Byte
Offset
Name RW Bits Description
Default
value
00h NUCCorrectionControl RW 31..0
Enable NUC processing blocks 3
Bits # Name Function
1..0 NucCorrection
Enable FPN and
PRNU stages
0: Off
1: FPN Only
3: On
3
31..2 Do not use 0
04h BprCorrection RW 31..0 Enable bad pixel replacement 1
08h DynamicRange RW 31..0
Select dynamic range
0: Sensor
1: Camera (enables Clip values below)
1
0Ch ClipLow RW 16..0 Low/Black clip value 0
10h ClipHigh RW 16..0 High/White clip value 65535
Autogain control
The base address for these registers is 0x43E1_1180
Byte
Offset
Name RW Bits Description
Default
value
04h AutoGainControl RW 31..0
Enable auto gain processing blocks 0x4000
Bits # Name Function
0 Enable Enable AGC block 0
3..1 Do not use 0
4 GainControl
0: Automatic Gain
1: Manual Gain
0
5 OffsetControl
0: Automatic
Offset
1: Manual Offset
0
7..6 Do not use 0
8 AutoModeUpdate
AGC status
0: AGC running
1: AGC stopped
0
11..9 Do not use 0
15..12 RegulationSpeed Regulation speed 4
31..16 Do not use 0
08h OutputHistogram RW 31..0
Output histogram control
0x0200
2000
Bits # Name Function
15..0 MaximalGain Maximum gain 0x2000
31..16 HistogramMidpoint
Midpoint of output
histogram
0x0200