Xantrex XTR 100-17, Operating Manual

Page: 108 / 274

Analog Programming (APG) and Isolated Analog Programming (ISOL)
4-16 975-0200-01-01
The output voltage display should read
LE U
and the output current
display will display APG level.
4. Press the Rotary knob/Enter button to return to normal mode.
5. If the APG mode was modified in step 2, execute the procedure to
deactivate the APG voltage mode.
Quick Tip
Remote operation
uses these SCPI
commands. See
page 5–1.
The SCPI command (s) for these instructions are:
[:]SYSTem[<channel>]:REMote:SOURce[:VOLTage]
[:]SYSTem[<channel>]:COMMunicate:APRogram:LEVel[:VOLTage
]
[:ISOlated]
[:]MEASure[<channel>]:APRogram[:VOLTage][:SCALar][:DC]?