Xantrex XTR 100-17, Operating Manual

Page: 226 / 274

A-18 975-0200-01-01
S
C
PI
C
o
mm
an
d
R
e
fe
re
n
ce
Table A-4 SCPI Commands for Calibration
Function SCPI Command Description
Parameter and
Range
Query
Restore
Factory
Calibration [:]CALibration[<channel>]:RESTore Restores the calibration to
the factory defaults. N/A N/A
Calibrate
OVP
protection.
[:]CALibration[<channel>][:VOLTage]
:PROTection[:OVER]
Calibrate the over voltage
protection. <OVP Voltage Set
in Volts> No
Enter Output
Voltage Data
[:]CALibration[<channel>]:OUTPut
:VOLTage
Calibrates the output
voltage. <Voltage set in
volts> No
Enter Output
Current Data [:]CALibration[<channel>]:OUTPut
:CURRent
Set voltage output
calibration level <Current set in
amps> No
Calibrate the
Voltage
controlled
Non Isolated
Voltage APG
feature
[:]CALibration[<channel>]:MONitor
[:VOLTage]
Calibrate the voltage
monitor signal system. ? | <NR1> |
<nothing for
interactive mode> Yes
Calibrate the
Voltage
controlled
Isolated
Voltage APG
feature [:]CALibration[<channel>]:MONitor
[:VOLTage]:ISOLated
Calibrate the isolated
voltage monitor signal
system. ? | <NR1> |
<nothing for
interactive mode> Yes
Calibrate the
Voltage
controlled
Non Isolated
Current APG
feature
[:]CALibration[<channel>]:MONitor
:CURRent
Calibrate the current
monitor signal system. ? | <NR1> |
<nothing for
interactive mode> Yes