Xantrex XTR 100-17, Operating Manual

Page: 76 / 274

Local Operation
3-28 975-0200-01-01
User Setting Memory Locations
There are three user setting memory locations available for storing
frequently used configurations. These user setting memory locations help
to facilitate multiple users of an XTR power supply who have different
setups or when multiple loads are used that have different requirements.
Table 3-8 lists the values that are stored in each user setting memory
location.
Saving User Setting Memory Locations
To save user setting memory locations:
1. Turn the mode control knob to the SAV position.
SAUE
is displayed on the output voltage display with a number
indicating a preset position which is displayed on the output current
display.
2. Turn the Rotary knob/Enter button to select a preset position from 1
to 3.
3. Press the Rotary knob/Enter button.
SAuE done
is displayed on the output voltage display.
Table 3-8 User Accessible Saved/Recalled Settings
Voltage Setpoint
Current Setpoint
Over Voltage Protection (OVP)
Over Temperature Protection (OTP)
Autostart Output On/Off
Autostart Aux On/Off
Foldback Mode
Foldback Delay
Shutdown Logic
Voltage Analog Programming (VAP) Mode
Voltage Analog Programming (VAP) Level
Current Analog Programming (CAP) Mode
Current Analog Programming (CAP) Level
Alarm Latches
Front Panel Timeout