![background image](http://html.mh-extra.com/html/xantrex/xantrex-pro-xm-1000/xantrex-pro-xm-1000_owners-manual_881452029.webp)
Installation
3–10
975-0263-01-01
Materials
The following checklist is a general list of required materials.
p
Four corrosion-resistant fasteners sized #10 (M4.5) for mounting the
inverter
p
Copper DC input cable as calculated in Table 3-1 on page 3–7
p
Two 3/8 inch (M8) ring terminals sized for the cable diameter to
connect the DC cables to the DC cabling terminal
p
Lugs and terminals to connect the DC cables that connect to the
battery, disconnect/battery selector switch and fuse holder(s)
p
DC fuse(s) as calculated in “Calculating Fuse/Circuit Breaker Size”
on page 3–8 and fuse holder(s)
p
Copper chassis ground cable as specified in Table 3-2 on page 3–7
p
Ring terminal (appropriately sized to connect copper cable to chassis
ground stud) that meets the following specifications:
•
#8 (M4) stud
•
UL/CSA approved
•
copper
•
tin-plated
p
Battery isolator (if connecting to a multiple-battery system)
p
Disconnect/battery selector switch
p
Optional: 2 × 15 A circuit breakers (XM 1000) or 2 × 20 A circuit
breakers (XM 1800), used for hard wiring the AC input and AC
output to an existing AC circuit.
p
Optional: Alternator controller
1
p
Optional: High-output alternator
1
1.Consult Appendix B, “Battery Types” and Appendix C, “Alternators and Charging
Systems” to determine whether you need these components.
Important:
The product comes with the items listed on page 2-1. If you have
lost any of these items, an accessory kit of fasteners is available under Xantrex
part number 808-7119. Please visit
www.xantrex.com/buy.asp
to order.
Summary of Contents for Xantrex PRO XM 1000
