Xantrex Truecharge TC1012, Owner'S Manual, Page: 56 / 80

Troubleshooting
3–8 975-0401-01-01
High Battery voltage
fault (>16.6V) • Discontinue or disconnect AC power source from
supplying power to the charger.
• Disconnect voltage sensitive DC loads from DC
supply to prevent damage.
• If the DC bus voltage is still measuring high after AC
power has been disconnected, call a qualified and
certified electrician.
High Charger Temp
warning (>50°C) • Check that the battery type and temperature settings
match the actual battery.
• Allow the Truecharge™ 2 Battery Charger to cool.
• Improve ventilation or install in cooler location. If the
temperature increases, the Truecharge™ 2 Battery
Charger will display a fault and stop functioning.
• If the optional remote panel is installed, set a lower
limit on the output current to cool down the charger.
High Charger Temp
fault (>70°C) • Check that the battery type and temperature settings
match the actual battery.
• Allow the Truecharge™ 2 Battery Charger to cool
while the AC is connected so the fan stays on.
• Improve ventilation or install the charger in cooler
location.
Flashing LED Solid LED
Table 3-1 Interpreting Fault and Warning Indicators
Fault or Warning
Condition
Temp Fan AC Battery Fuse Charger Remote Fault
Solution
F
u
s
e
C
h
g
r
R
e
m
TC2 Series BattChg Owners Guide.book Page 8 Tuesday, July 1, 2008 11:55 PM