Xantrex Freedom XC2000-230V, Owner'S Manual, Page: 72 / 106

Adjusting Settings in Configuration Mode
56 Freedom XC 2000 - 230V Owner's Guide
Setting Name
Setting
Number
Default
Value
Range of
Values
Description
Inverter Shutdown
Recovery
13 MAT
At0 (auto-
restart)
MAT (manual
restart)
The inverter shuts down when there is an over temperature,
overload, and short circuit condition. Selecting
ATO (auto-restart)
will allow the inverter/charger to recover automatically from a
shutdown up to three times maximum. Selecting
MAT (manual
restart) allows the user to restart the inverter/charger by performing
a manual reset, that is, by acknowledging the restart via the
display panel.
Audible Alarm
14 bON
bON (Audible)
BOF (Mute)
The alarm beeps once every 5 s.
Battery Type
20 FLD
FLD (Flooded),
AGM (AGM),
GEL Gel
USE (Custom)
LFP (LiFePO
4
)
The use of LFP (LiFePO
4
) as a battery type requires a compatible
BMS. See on page 13 for safety warning instructions.
Battery Temperature
21 HOt
CLD (Cold)
VRM (Warm)
HOT (Hot)
Selecting Cold from Warm will increase charger voltage by 0.4V.
Selecting Cold from Hot will increase charger voltage by 0.8V.
Battery Temperature
21 HOt
CLD (Cold)
VRM (Warm)
HOT (Hot)
Selecting Cold from Warm will increase charger voltage by 0.4V.
Selecting Cold from Hot will increase charger voltage by 0.8V.